產品特點
- 2.4G Digital Dual-channel Wireless Microphone, Global Free Frequency
- 48kHz/16bits Audio Recording, Intelligent Denoise
- Support On-board Recording with 8G Internal Memory
- Support Recording File's High-speed Transmission and Copy
- Support Digital&Analog Output Mode, Universal for Camera, Phone and Computer
- Safety Channel for Ultimate Flexibility in Post-production
- Visual Power, Audio Dynamic Monitor and Other Display Functions
- M/S Switch, Real-time Audio Monitor
- Internal and External MIC Two Input Modes
- RF Technology, Auto Freq. Adjustment, Stable Transmission
- Low Latency < 20ms, Working Range Up to 100m
- Designed with Multi-functional Belt Clip and Compact
- BOOMX-D PRO SPECIFICATION
BOOMX-D PRO PACKING LIST (D2 = TX + TX + RX)
2 x Transmitters (TX)
1 x Receiver (RX)
2 x Lavalier Microphones
2 x Wind Muffs
1 x 3.5mm TRS to TRS Output Cable (for Canon, Nikon)
1 x 3.5mm TRS to TRS Output Cable with Impedance (For Sony, Panasonic, Fujifilm)
1 x 3.5mm TRS to TRRS Output Cable for Smartphones
1 x 3-in-1 Charging/Output Cable
1 x Reset Pin
1 x Carry Case
1 x User Manual
NOTICE:
- Due to 2.4G wireless characteristics, it's better to keep face to face when use it, and don’t turn your back to the receiver, otherwise it is easy to generate breakpoints, which is a normal phenomenon.
- Don't block the antenna position to avoid any poor signal generated
- Please attention that it can not realize STEREO function when in single-channel and safety mode.
- When you need to continuously record, a new recording file will be saved every 2 hours of recording, and the total recording time is 24 hours. When the 8G memory is full, the new recording file will overwrite the old recording file.
- The recording and copy function can’t be used at the same time.
- 3.5mm TRS-TRS Audio Cable is suitable for Canon, Nikon and other cameras with low sensitivity.
- 3.5mm TRS-TRS Audio Output Cable with Impedance is suitable for Sony, Panasonic, Fujifilm and other cameras with high sensitivity(3.5mm TRS-TRS Audio Output Cable with Impedance is recommended to be used if there is sound explosive in recording ).
- When using on mobile phone, it's better to turn of WIFI and Bluetooth to avoid 2.4G wireless interference.
- This product belongs to high-precision instruments, please avoid falling, collision or pounding.
- Do not use this equipment in the vicinity of heat source or interference source, such as radiator, oven, refrigerator or air conditioner, smartphone or next to the WIFI AP.
- f the pick-up distance is close or when used outdoors, please put on the wind muff to prevent sound burst or reduce wind noise.
- Do not use the equipment in rain or in a damp environment to avoid short-circuit danger.
- Please keep the product in a dry environment.
